Physical

density ~1kg/L (20^oC)

Properties

Inflammable
SurfaPore C & R: milky-white liquids; SurfaPore T: clear liquid.
SurfaPore C & R: pH=7,1; SurfaPore T: pH=7,0 - 8,0
Solvent: water

Packaging

Plastic bottles: 1L, 4L and Plastic canister: 30L

Storage

Storage Temperature: +5^oC to +50^oC
Require protection from freezing conditions.
Minimum storage life in unopened, original sealed containers:
SurfaPore C, R & W - 2 years
SurfaPore T - 12 months

Application

Clean surfaces, before applying SurfaPore formulations.
SurfaPore C & R: Surface Coating: Apply using a brush, a roller or a sprayer. Let SurfaPore C & R be absorbed from the surface Mixing: SurfaPore C can be mixed with mortar powders instead of water, at the same mixing ratio.
SurfaPore T: Apply using a soft cloth. Let SurfaPore T act for 15 minutes, before removing application excess.
Do not use after the liquid has freezed.
Substrate temperature from +5^oC to +70^oC
Estimated Consumption: 8m²/L
Apply on vertical surfaces by starting from bottom to top.

Post Application

Protect modified surfaces for 24 hours.

Treatment

Maximum coating efficiency is achieved 72 hours after application.